Nice to see your Annie earning her keep.
That is one very fine looking Annie. I really like what you did to the tender.
Can you post some pics of the tender??? and how you did it??
Thanks
Rodney
Rick, great pictures of the train and layout… 
Mark V said:Mark, I guess you don't like the prototype, as the general proportions of the "Annie" are pretty much spot on. I have quite a few pictures of #12 at Tweetsie. Ralph
No matter how hard I try, I simply do not like my "Annie". I don't know why but something about the proportions really throws it off.
Well call me silly Ralph, I had no idea there was a prototype! And you are correct, very close in appearance.
I think it’s the Bachmann’s severe taper from the boiler to the smoke-box that I don’t like. Bear in mind it’s not like I hate it, I just don’t like it. I do like the raised tender height in Rick Marty’s example. I also like what Jack Thompson did to his. It may actually be that the tender mods alone would re-proportion the whole loco into something I like better. We’ll see!
I’d say it’s the factory pilot…it really takes away from it’s appearance. The tender pretty much looks like that in ‘real life’. We’re planning to visit ole #12 as soon as they open
Here’s a shot from a few years ago…
(http://freightsheds.largescalecentral.com/users/thejoat/_forumfiles/IMG_4615.JPG)
The Annie is sort of a mish-mash of different scales. I redid mine with a new boiler, cab and tender, as well as domes and some other details. Not much resemblance, now.
Mark, The boiler to smokebox taper is correct. The green paint kind of hides it, but it’s there 
(http://freightsheds.largescalecentral.com/users/cabby/_forumfiles/S1030111cM.jpg)
Rick, I also love what you’ve done with your Annie and would also like to see some more pictures of the tender. Ralph Cale, Just about the time I give up on you, you re-appear. You know how to get a hold of me
Ralph,
That last picture really does look like the Bachmann!
I’ve seen yours before Bruce…Nice, very nice.
And just to be clear, Bachmann did more for this hobby with the introduction of the 10-wheeler than any manufacturer outside of LGB (who really started it eh?). How many have been brought into this hobby because of those sets? I love it for that alone!
@ Mark V…I totally agree with your last statement. And what other Loco as finely detailed (The Annie version) can you regularly pick up for less than a 100 bucks on the net.
@ Rick… I too would be interested to see your tender mods up close as well as the pilot modification. Really like the look you have achieved. And what Annie did you start with?
Mark V said:YEP that is how I got started in large scale
And just to be clear, Bachmann did more for this hobby with the introduction of the 10-wheeler than any manufacturer outside of LGB (who really started it eh?). How many have been brought into this hobby because of those sets? I love it for that alone!
And now with the updated Annie with all metal gear should help even more.
Great pics Rick
Rick great pitures. The annie looks great.
Those are some great fake rocks! And threads on you building the scenery???
Hi all,
Thanks for all the comments. Glad you liked the pictures.
We sure had fun yesterday and glad we did. Today is a
miserable day, weather wise, no rain but cold and windy.
To answer a few questions about my version of the Annie.
I bought the black unlettered version from Train World in 2000-2001 when
they had the introductory price of 129 dollars on them. I ran it for a year
or so then just had to do something about that coal load in the tender.
“My” railroad is all oil burning so a fuel bunker was in order. I looked
around for ideas but mostly just played it by ear and built the bunker.
That held me for a while. A year or so later I couldn’t stand the “cow catcher”
look any longer so built a new step pilot beam to replace it. Well long as I had
it on the bench I might as well shorten the back head (1/2 inch) and add a step plate.
Hmmmm, shure would look better with a 1:20 scale cab, so that happened.
A couple years later, I decided I just had to have Battery, RC, and sound, so on to the bench
it went again for another rebuild. That was my first electronics project and with lots of
professional help (Thanks Jonathan) it came out perfect.
The loco ran great, then one day at a show it was scooped right out of the carrying cradle by
a passing handrail and took a header on the concrete floor, loco and tender were picked up
and put in a paper box. After about a month I finally dumped it all out on the work bench and
started the fourth rebuild. Actually it wasn’t damaged nearly as bad as it had looked and we
were up and running again in just a few days.
The last rebuild was the installing and refitting of the loco superstructure to the Barry’s Big Trains
drive train. That went well but took a little extra tweeking because of previous modifications, like
shortening the back head.
I probably only have a dozen hours on the new drive train and after a couple of adjustments is running like a watch, very smooth and sure.
All the gabble above is just to let you know that this loco, like most of mine, are/is a work in progress
spreading over a decade or more.
I will get some pictures of the modifications and post them in a few days.
Matt,
I will get some pictures of the bridge deck for you.
Thanks for your interest.
Rick
Rick Marty said:I'm learning patience Rick and just learning from your pictures! :)
All the gabble above is just to let you know that this loco, like most of mine, are/is a work in progress spreading over a decade or more.
What a picture, !!!
Barry - BBT
Your beautiful work is inspiring me to tear one of my Annie’s apart.
Hi Matt, Here is some shots of the bridge taken today, hope they are what you wanted to see. The basic construction is 1/2 inch steel tubing and 1/8 inch steel rod. Built for 1:20 scale equipment with a little extra room thrown in for good measure. The bridge is 76 inches long 12 inches wide and 16 inches high and is mounted with a single lag bolt at each end. This mounting system allows for quick removal of the bridge for service.
The wooden deck is built from old growth Redwood and is a drop in modular piece that is mounted with screws through the steel tubing from underneath. This allows for quick separation of the deck from the frame for painting and oiling.
This deck view shows that the guard rails are just timber on the outside of the running rails and catwalks and safety cables are in place. This section of the railroad has track power available so there is a jumper wire with plugs at each end and slip rail joiners are used for track alignment
As you can see from the weathering on the wood the bridge has been in place for about 5 years and it was built before I had a nail gun ;)
Thanks for your interest.
Rick
Thanks a bunch for the bridge photos Rick. Now I see why it looks so good. Handlaid rails on wood ties. Nothing looks as good as the real thing. These photos will certainly be useful when I add decking to my bridges:
(http://i.imgur.com/SYmRT.jpg)
Thanks again.