Large Scale Central

Thomas gets "the treatment" total de-anthromorphication

Got Thomas, poor Thomas, he didnt even make it out of the shop without having his face bartered away. :wink: Here he is with new Chief Mechanic Homer

Using the same Face-ectomy technics learned on Percy, a short stand at the workbench ended thus:

This time using a brass Trackside Details smokebox door. took forever to sand the styrene round to fit right, now onto the cab PS after complaints about Cheif Mechanic Jigsaw were investigated he was subsequently discovered to have a rather disturbing past and as such was let go and is now working as an Cheif Executive at NBC. :open_mouth: Besides Homer works for donuts :lol:

Vic,
You are having too much phun!

Now couldn’t you have kit bashed a playmobile loco, instead of Thomas.
Or is this your way of telling Bachmann “Thanks for the fodder”
:slight_smile: :slight_smile: :slight_smile:

I have been seeing a lot of Wanted posters up for “Vic the Ripper”

I think its great seeing what vic is doing without having to fork out a ton of $. I have learned a great deal from Vic and love to see what he always comes up with. I hope you do the next challenge Vic.

Painted

(http://1stclass.mylargescale.com/vsmith/Thomas03.JPG)

Added air compressor to the front of the tank

(http://1stclass.mylargescale.com/vsmith/Thomas04.JPG)

(http://1stclass.mylargescale.com/vsmith/Thomas05.JPG)

Next comes adding the footplate

(http://1stclass.mylargescale.com/vsmith/Thomas06.JPG)

Should add, to replace the face on Thomas, unlike Percy, its necessary to remove the eye moving mechanism as it sticks about a 1/8inch beyond the boiler face, its only 4 screws.

Pics dont show how much has been changed, cut of the front splashers, added a sheet styrene cover over the remaining gap where it was cut, added a pair of airtanks (ex-MDC Big Hustler mufflers) onto the footplate:

(http://1stclass.mylargescale.com/vsmith/Thomas07.JPG)

(http://1stclass.mylargescale.com/vsmith/Thomas08.JPG)

Does a fair bit to further change the appearance away from the kiddy show, working on the backhead now, very tight space, its been more a bit a pain that the red striped catapiller was.

Vic, if you get the shell back off, would you show what the drive looks like without the eye mech?

thanks
cale

Cale, here is what the gearbox looks like without the eye moving mechanism,

(http://1stclass.mylargescale.com/vsmith/Thomas09.JPG)

(http://1stclass.mylargescale.com/vsmith/Thomas10.JPG)

It needs to be removed if a new smokebox panel is to be placed Progress: New backhead in place

(http://1stclass.mylargescale.com/vsmith/Thomas11.JPG)

Crew added, tight quarters

(http://1stclass.mylargescale.com/vsmith/Thomas12.JPG)

side opening cut out, side grabbars added

(http://1stclass.mylargescale.com/vsmith/Thomas13.JPG)

(http://1stclass.mylargescale.com/vsmith/Thomas14.JPG)

Added additional panels under the footplate to fill it out and make it less toylike I do beleive its finished

(http://1stclass.mylargescale.com/vsmith/Thomas15.JPG)

(http://1stclass.mylargescale.com/vsmith/Thomas16.JPG)

Thomas has attracted a couple railfans

(http://1stclass.mylargescale.com/vsmith/Thomas17.JPG)

All thats left is new nameplates, and maybe a new coat of paint, but till it warms up a bit and is easier to paint here, I’ll keep the color as is.

Cale play’s with dollies!
:slight_smile:

Fine job!!! Vic.
And the girls are are looking good too.
Randy

Nice looking work there Vic