Hello!
Does somebody know where I can find the nut and bolt shown in the attached image for a Delton, Kalamazoo, Hartland 4-4-0 locomotive?
Thanks
I would think that any bolt of that size with a piece of brass tubing that the bolt would just fit inside it and then cut to length would work. For me being a modeler first and a train runner second, it looks like about a 5 min. fix. I would say it’s probably a metric size bolt and lock nut which should be easily found at a good hardware store, not Home Dept, or Lowes. Hope you can find what you want if making your own piece is not to your liking. or knowhow.
Or try Mcmaster Carr for the correct hardware. you may have to buy 5 pieces, but then you wil lhave spares.
Al P.
Welcome Roberto,
I’m not sure of the thread pitch or diameters but I would start with a search of 4/40 SHOULDERED BOLTS or perhaps metric but you will want smaller than M5 and only using this image as a reference on how to search out what you are after.
Thank you very much for your help my Friends!
Have a nice week!
Robert