Hello Everyone, we have come out with a new version of our very popular C-10 Carrier Board, the C-10L which comes with an 18.5V 5200mah Lithium-Ion Battery-Pack & Charging Circuit Board. In the photo’s below we have installed the C-10L in a AML 40ft. single door box-car, with metal ball-barring wheels. You will notice we have also installed the QSI Magnum controller board and receiver card along with an external DPDT switch and DC power jack, because in most single sided box-cars the door does not lineup with our internal Run/Off/Charge switch. This is what makes the C-10 very versatile, it can be placed in Box-Cars, Gondola’s, Coal & Grain Hoppers and still can be remotely controlled from outside your trailing-car. I have also extended a four wire Aristo connector to the engine, so the Red & Black wires will connect to the motor leads and the Yellow & Green wires will connect to an additional speaker that I installed in the front of all three of my GP-40’s. We are also in full production manufacturing the plex-glass speaker cover to enhance the sound produced by the PUI 5W 8ohm, 8oz. magnet speaker. I will have more information via our website in the upcoming days, enjoy… Rick Isard Cordless Renovations, LLC http://www.cordlessrenovations.com/store
In the picture above, I added a four pin Aristo connector instead of the two pin so I can hookup an additional speaker in the front of my GP-40. There’s probably an easier way to do this, but I wanted to connect all the speaker wires together as one whole unit and operate directly from the QSI Magnum board. You will not need to rewire or connect an additional plug to connect the speaker in your engine and the speaker within the C-10L Carrier Board. I thought I would just blow the doors off the loco’s…
Enjoy, and if your having problems accessing our website (google is having problems with one of our web pages) please go to www.cordlessrenovations.com/store Sorry for the inconvenience, Rick Isard Cordless Renovations, LLC
