I just got a deal on Amazon that I thought worth sharing. Recently I’ve been using those smaller Xacto-type blades, but have been needing a less steep angle for the blade. I found this deal:
I’ve always liked this top shape I have circled in this screenshot from your link, at least for cutting flat stock. The flatter angle tends to work better for me following curves and such, and far less breaking tips off of the blade (basically never happens with these).
Of course you still need the classic long blade angle type for any kind of shaving material.
I know they are cheap over your way. But it’s a worthwhile endeavour to use a strop with some compound to make sure the edge is maintained. It only takes a few swipes.
Thanks for your thoughts David, good to hear from you.
Yeah, today I “had” to have that shape, and also the square end shape. Usually I use the larger handle and blades, but for my current project I’m really needing those smaller blades.
Hey Bill. One of my go-to blades has been disposable scalpels. If you’re referrring to something else, please describe.
I’ve used a handle and disp blades, which are by far the most cost effective. But I also like the disposable all in one thing. Mine have lasted months (depending on what I’m sawing), at about 60 cents per.
There are many other brands / versions, as you probably know.
Yes, they’re delicate, and the edge doesn’t last long. As an old tool fart, it’s still hard for me to throw them away… But I did toss one today, and sense a bit of pride in doing so, for some reason. I have a small bin of Xacto blades that I think I accumulated as a teenager; need to get over it, and toss those!
Back to the point. The reason I’ve stayed with these all in one’s, over the last couple years, has been the alternative: the problem of separate blades breaking off the (poorly made) handle, and not yet finding a handle of good quality.
I suppose this sort of set might be a cheap and good introduction into the world of scalpels:
I’m getting 100 blades for about $10 USA free delivery. The stainless steel handles are pretty inexpensive too. Use a set of piers to attach. Herself loves Temu, but I’m into delayed gratification.
Oh, and they’re sterile too, for what that’s worth.
Good to hear from you as well. I have never used that square end blade, but maybe as I get to work out in the barn, I will figure out why I may want that type around.
I’ve had mixed results with the scalpel size saw blades. I have not made a purchase recently but I see they are available in a different format on AliExpress as well.