I got a laser and I believe the 2 USB dongle things have been erased.

http://ecpur.com/itm/2220.html

There doesn’t seem to be anything on either one that came with the machine.

I went to the manufacturer’s site and downloaded their free software. corell and moshi

I got corel draw 11 from another site already loaded onto my old computer. That doesn’t seem to have the laser controls on it?

the corell software I down loaded from the laser’s site wants to know the password before it will load onto the computer? I can’t seem to find any?

I tried the same with the moshi program with the same results. no password?

http://www.ecpur.com/sch/17_3.html

I don’t wish to mess up Cliff’s post anymore, as I already got some help there. It seems to take away from what he’s doing.

While I’m trying to get things to work, I had everything plugged in. The computer recognized some hardware and sees that the laser is now connected to the USB. However water is spilling on the floor so I have to inspect further at where that’s coming from. I hope it’s a cracked hose and not the laser tube or jacket. This is not going well!

Joe - my first laser cutter required a dongle to get the Corel laser plug-in to work - if it is erased you may be out of luck - FYI, the dongle plugs into the computer that is running the Corel software, not into a USB socket on the laser cutter

dave

Thanks Dave. That is where I plugged it into. I tried to look at it to see any files or key is on it. Nothing shows up. Nothing happens when I plug it in either. Ah well.

The prices are really falling on these and I may have to buy one soon. I got this for free so…?