Forum Sponsorsss


Forums Modeling Rolling stock
  • Topic: USA Trains vs. Accucraft

    Back To Topics
    (0 rates)
    • April 26, 2016 3:41 PM EDT
      • Elizabeth, Pennsylvania
         
      • Posts
        63
      • Thanks
        12
      • Thanked
        1

      USA Trains vs. Accucraft

      I've been looking to add a PRR N5 or N8 cabin car (caboose) to my rolling stock. USATrains offers a nice model of a N5 cabin car. Accucraft has a nice model of a N8 model; http://www.accucraft.com/modelc/AL93-051-CABOOSE.htm

      Why is there such a massive price difference? USATrains is about $150, Accucraft $500. I own some USAT rolling stock. I own a Accucraft live-steam K4 locomotive. I understand that the USAT model is mostly plastic and the Accucraft is constructed in brass, but what, if any, merit exists for brass constructed rolling stock verses plastic constructed rolling stock?

       

       

    • April 26, 2016 3:50 PM EDT
      • Warwick, RI
         
      • Posts
        1,373
      • Thanks
        81
      • Thanked
        109

      Because its Accucraft!

      And also Accucraft probably makes much fewer pieces, and like you said Brass..

      However, if I am correct I believe your K4 is a 1/29 scale? if so, go with the USAT as it will match in size.

      The Accucraft is a 1/32 scale and will appear much smaller next to the K4.

    • April 26, 2016 4:32 PM EDT
      • Cape Cod,
         
      • Posts
        3,131
      • Thanks
        198
      • Thanked
        358

      The Accucraft "museum piece" is money and USAT is for running. 

       

      When you think about it many of the fine details on a piece of Accucraft rolling stock disappears at about 5 feet away depending on how good your eyes are.  Owning a Accucraft K4 live steam is awesome and that is what people are going to be focusing on plus you can get 3 USAT cars for the price of one Accu one and have money left over.  

      I like USAT products.

      Happy RRing.   

    • April 26, 2016 4:48 PM EDT
      • Pittsburgh, Pennsylvania
         
      • Posts
        11,160
      • Thanks
        129
      • Thanked
        931

      Aristo did a PRR caboose in brass. Ok, they probably had it done for them. But brass is so much more expensive then plastic. The material costs more, and the fabrication costs a lot more. Plastic parts are snapped, or glued together. But quality brass equipment is soldered together, and that takes more skill, and more time.

      ____________________________________

      Shannon car Shops
      Home of the infamous leg lamp

      I.A.R.R.R. Member #12

      and King Butt Modeler

Forums Modeling Rolling stock

    Icon Legend

  • Topic has replies
    Hot topic
    Topic unread
    Topic doesn't have any replies
    Closed topic
    BBCode  is enabled
    HTML  is enabled

Add Reputation

Do you want to add reputation for this user by this post?

or cancel

Ads by Google