Forums Modeling Modeling
  • Topic: chatacter of styrene

    Back To Topics
    (0 rates)
    • February 11, 2020 3:46 PM EST
      • Ormond Beach, Fl. 32174
      • Posts
      • Thanks
      • Thanked

      chatacter of styrene

      Interesting observation of styrene, when building my this years MIK challenge I needed to bend a flat plate of some type over the top of my "concrete" foundation blocks for termite shields, and after several failed attempts settled on .10 styrene sheets cut into small squares, found it non bendy and wanted them to fold over the blocks, wound up placing them over an extra block and heating with a heat gun, the curled great except apparently they are side sensitive and only curl 1 way found that I had to try an edge and see which way it curled and if wrong way turn it over and proceed, must have some thing to do with the way it is made, anyone else run into this?  

    • February 11, 2020 4:07 PM EST
      • Mount Vernon, Missouri
      • Posts
      • Thanks
      • Thanked

      Very interesting. Will have to file that in the old memory bank  . Hmmmmmmm what was i supposed to file? Oh Yea heat up the brain and have a warped mind, that the termites can't eat

      Thanks Bill that will help, Hmmmmm help what?


    • February 11, 2020 5:35 PM EST
      • Post Falls, Idaho
      • Posts
      • Thanks
      • Thanked

      That's interesting Bill. I wouldn't have guessed that.

    • February 11, 2020 7:40 PM EST
      • Missouri, It's like Floodsburg, man
      • Posts
      • Thanks
      • Thanked

      Have only done a small bit of heat forming styrene and not recently. Sure would not have expected that!

Forums Modeling Modeling

    Icon Legend

  • Topic has replies
    Hot topic
    Topic unread
    Topic doesn't have any replies
    Closed topic
    BBCode  is enabled
    HTML  is enabled

Add Reputation

Do you want to add reputation for this user by this post?

or cancel

Ads by Google