Forums Modeling Other Scales
  • Topic: The Assembly of "Mariner"

    Back To Topics
    (0 rates)
    • November 19, 2019 8:31 PM EST
      • Southern Illinois
         
      • Posts
        9,249
      • Thanks
        571
      • Thanked
        537

      The Assembly of "Mariner"

      19 November, 2019 - Carlyle, Illinois

      .

      I'm starting a new thread on the merging of the "Tram" boiler and single cylinder marine engine with a "Conner Beam" frame, I've had for a number of years.  This resolves my wheel spacing and suspension concerns.

      .

      Once again I try to post a picture.

      .

      http://largescalecentral.com/filesharing/file/view/14476/19111901tram-jpg 

       

    • November 19, 2019 8:33 PM EST
      • Southern Illinois
         
      • Posts
        9,249
      • Thanks
        571
      • Thanked
        537

      Who knows, maybe I'll remember how to post pictures again as I document this.  Stay tuned, if you wish.

    • November 19, 2019 11:00 PM EST
      • Waverly, Alabama
         
      • Posts
        2,029
      • Thanks
        800
      • Thanked
        798

      Here ya go, Ric 

       

       

      I'm interested in watching this come together.  thanks for taking us on the journey with you.

      ____________________________________

       

    • November 20, 2019 2:41 AM EST
      • West Grove, Pennsylvania
         
      • Posts
        11,274
      • Thanks
        905
      • Thanked
        1,327

      You need to move that car out of the garage to make room for the machine shop your going to need................

      ____________________________________

      "Nothing in the world is more dangerous than sincere ignorance and conscientious stupidity." --Martin Luther King Jr

    • November 20, 2019 8:27 PM EST

      •  
      • Posts
        14,962
      • Thanks
        2,909
      • Thanked
        1,698

      Ken Brunt said:

      You need to move that car out of the garage to make room for the machine shop your going to need................

      OMGram ... I thought they took Rics drivers license a couple years ago? Why does he still have a car and do his children know he has one?

    • November 21, 2019 1:56 PM EST
      • Saint Johns, Florida
         
      • Posts
        4,615
      • Thanks
        532
      • Thanked
        747

      Ric Golding said:

      Who knows, maybe I'll remember how to post pictures again as I document this.  Stay tuned, if you wish.

       

      Photo inserting

      1. Start by uploading your photos to a server. You have storage space in the Freight Shed on this web site.
      2. After they are uploaded, click on the file you want to open.
      3. Once it is opened, RIGHT click on the picture and select copy image location. DO NOT use the url in the address bar of your browser.
      4. Next click on the insert photo button in your post and paste the image location in the source line.
      5. Look at the dimensions. You will see them if you click on the first box (height). Make it 800 then click on the second box and it will automatically be correctly scaled.
      6. Then hit OK and your photo will be in your post.

       

      ____________________________________

       

       

    • November 22, 2019 1:33 PM EST
      • Candlewood Valley, Connecticut
         
      • Posts
        13,792
      • Thanks
        1,525
      • Thanked
        1,125

      Ric Golding said:

      19 November, 2019 - Carlyle, Illinois

      .

      I'm starting a new thread on the merging of the "Tram" boiler and single cylinder marine engine with a "Conner Beam" frame, I've had for a number of years.  This resolves my wheel spacing and suspension concerns.

      .

      Once again I try to post a picture.

      .

      http://largescalecentral.com/filesharing/file/view/14476/19111901tram-jpg 

       

      So does this mean you have abandoned the original Cli-Shay project to utilize the boiler from it - or is this a whole new endeavor?

      ____________________________________

      www.cvsry.com www.cvsry.com

    • November 24, 2019 10:16 AM EST
      • Southern Illinois
         
      • Posts
        9,249
      • Thanks
        571
      • Thanked
        537

      Hey Jon,

      .

      Thanks for the question and interest.

      .

      The "Cli-Shay" sits in storage at the Finger Lakes Live Steamers for the Winter.  It 7.25 inches between the rails.  This one is 7.5 inches.  As I've progressed through these "semesters" of knowledge, I've obtained a number of projects and parts.  I'm thinking and working to consolidate parts to create engines that will serve my needs and improve my knowledge and skills.

       

    • November 24, 2019 10:34 AM EST
      • Southern Illinois
         
      • Posts
        9,249
      • Thanks
        571
      • Thanked
        537

      24 November, 2019 in Carlyle, Illinois

      .

      This past week's project was to grind the old ears/boiler mounts off of the Tram boiler.  This was done with a thin wheel grinding disc and cutting through the old welds.  Care had to be considered to not grind into the boiler plate, but only remove and smooth the area of the old welded on ears.  New ears/mounts were constructed out of 5 inch "C" channel, cut in to 2 -1.5 inch pieces and then cut those in half and drill for the 4 deck mounts.  Each one had to be cleaned up (no sharp edges) and a slight 45 degree bevel put on the back of each side and top to create a smooth welding surface.

      .

      Good friend, Jason, came over to inspect my progress/work and weld the ears/mounts on to the boiler.  Remember, I'm not a welder or machinist, so all of this is a challenge and learning experience for me.  

      .

      Next step is to drill and tap the holes in the deck of the frame to secure the boiler.

      .

      Thanks for looking, as I document my progress/ redo's and mistakes.

           

       

       

       

    • November 24, 2019 1:25 PM EST
      • Candlewood Valley, Connecticut
         
      • Posts
        13,792
      • Thanks
        1,525
      • Thanked
        1,125

      I'm not a machinist either, but have had a lot of success taping both plastics and steel.  So long as you make sure you have the correct size drill bit, a good sharp tap, a quality handle and lots of cutting oil, things work out nicely. Its extremely satisfying the first time you threa a bolt into a hole you tapped yourself

       

      ____________________________________

      www.cvsry.com www.cvsry.com

    • November 24, 2019 9:41 PM EST
      • Southern Illinois
         
      • Posts
        9,249
      • Thanks
        571
      • Thanked
        537

      Succeeded at drilling and tapping holes.  Needed to get my welding done when friend was available.  Realized I would have been better to tap the holes and mount the mounts before welding them to the boiler.  However, I got it complete.  I was apprehensive about drilling and taping in solid bar of the end piece of the frame, but it worked.  Moving on to next part of project.  

    • December 18, 2019 9:09 AM EST
      • Easton , Massachusetts
         
      • Posts
        4,670
      • Thanks
        2,323
      • Thanked
        664

      I thought of you when I looked into his work : http://large-scaledieselmodels.blogspot.com/2010/

       

      ____________________________________

       My u-tube  My Vimeo

      The light in the tunnel might not be an engine , but a light in the caboose of my own train on my Roundy Round Rail Road !    My empire is complete...I think...

Forums Modeling Other Scales

    Icon Legend

  • Topic has replies
    Hot topic
    Topic unread
    Topic doesn't have any replies
    Closed topic
    BBCode  is enabled
    HTML  is enabled

Add Reputation

Do you want to add reputation for this user by this post?

or cancel

Ads by Google