Forum Sponsorsss


Forums General Indoor and Micro
  • Topic: Fn3 "Dead River Lumber Co"

    Back To Topics
    (0 rates)
    • August 8, 2017 5:56 PM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      I use sawdust + water / wood glue (50/50) + acrylic paint. The hues are just basic fonts for now

    • August 17, 2017 7:33 PM EDT

      •  
      • Posts
        299
      • Thanks
        0
      • Thanked
        12
      • Reputation
        Well Respected

      Hey guys here is what I use . It works twice as fast sawdust and glue...

       

      Homemade Sculptamold

      https://youtu.be/fqq5k-h9Iwk

       

      https://youtu.be/kX16CHUTfCY

       

      Ty

    • September 4, 2017 9:08 AM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      I propose you the beginning of a small construction of an old west station to install it later on my layout.

      The frames are in samba of 9x9, the vertical and the blades are in balsa of 1mm, the frames of door and window in balsa of 2.

       

       

       

       

       

       

       

    • September 8, 2017 7:51 AM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      And here I am today

    • September 8, 2017 12:22 PM EDT
      • Denver, Colorado
         
      • Posts
        1,501
      • Thanks
        92
      • Thanked
        148
      • Reputation
        Well Respected

         That's looking really nice, Monsieur...keep us posted right through to the finish.

       

      ____________________________________

    • September 8, 2017 3:32 PM EDT
      • Pittsburgh, Pennsylvania
         
      • Posts
        9,031
      • Thanks
        50
      • Thanked
        407
      • Reputation
        Well Respected

      Very nice.

      ____________________________________

      Shannon car Shops
      Home of the infamous leg lamp

      I.A.R.R.R. Member #12

      and King Butt Modeler

    • September 8, 2017 10:55 PM EDT
      • Mount Vernon, Missouri
         
      • Posts
        573
      • Thanks
        14
      • Thanked
        40
      • Reputation
        Well Respected

      i love your structures, Very good

      Dennis

    • October 20, 2017 10:39 AM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      Hello everyone
      After spending a good fortnight in the masonry, I resume my modeling activities.
      Having bought ink cartridges (more expensive than my printer) I made signs for my station.

      Here is what it gives

       

       

       

       

       

       

       

    • October 22, 2017 9:52 AM EDT
      • Denver, Colorado
         
      • Posts
        1,501
      • Thanks
        92
      • Thanked
        148
      • Reputation
        Well Respected

          You might take some consolation in knowing, monsieur, that you are not alone in France; over here in America also those freaking printer cartridges can cost more than the damn printer. At least it makes me feel better anyway that things are the same over there.   How do you say "What a racket!" in French?

       

         This is a great scratchbuild Jean-Gilles, and the coloring of the wood and the signs came out perfect. Nice job.

       

       

      ____________________________________

    • October 22, 2017 5:56 PM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      Thank you John
      In French: "racket" !!

    • October 24, 2017 11:38 AM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      Hello to you
      I continue to do my signs.
      I wanted to print upside down and apply to the wood, but that was not a success, I went back to print
      Some pictures

       

    • October 27, 2017 8:30 AM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      I had forgotten an important detail for my station: the train schedule.
       The problem will be fixed (2.2mmx1.6mm)

       

      This post was edited by Jean-Gilles Durand at October 28, 2017 9:19 PM EDT
    • October 28, 2017 1:15 PM EDT
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      thank you
      The sheriff (my girlfriend), fearing to see the evildoers fleeing or entering through the window, asked the blacksmith (myself) to make bars for him.

      What was done quickly (well almost ...)

       

       

    • October 28, 2017 9:18 PM EDT
      • Southern Illinois
         
      • Posts
        8,475
      • Thanks
        85
      • Thanked
        110
      • Reputation
        Well Respected

      My goodness, that's terrific!  Thanks for sharing.

      .

      Holy cow! I look forward to following your work.  Please keep posting.

      This post was edited by Ric Golding at October 28, 2017 9:22 PM EDT
    • November 23, 2017 6:46 PM EST
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      Today as it was a time of m ...... well I stayed in it !! and that's what I spent my time

       

       

       

       

       

      All balsa of 1mm and 2mm, tinted with Indian ink and rust powder. I did not try to do a great thing, the whole will be mounted on a promontory overlooking the ravine with direct ejection. We're still not s'emm .... !!

    • November 23, 2017 8:06 PM EST
      • Mount Vernon, Missouri
         
      • Posts
        573
      • Thanks
        14
      • Thanked
        40
      • Reputation
        Well Respected

      Jean . I love your buildings, your technique looks great on your Barber/Sheriff structure, you have done a beautiful construction making it look very real of the old west

      Thanks for Sharing pictures

      Dennis

    • November 27, 2017 6:01 PM EST
      • Chatellerault, France
         
      • Posts
        110
      • Thanks
        0
      • Thanked
        20
      • Reputation
        Well Respected

      Hello everyone

      Thank you Dennis
      I started a galley that I do not advise nervous or in a hurry.
      I started building a log trapper's cabin. I'm out of wood,  That's where I am

       

       

       

       

Forums General Indoor and Micro

    Icon Legend

  • Topic has replies
    Hot topic
    Topic unread
    Topic doesn't have any replies
    Closed topic
    BBCode  is enabled
    HTML  is enabled

Add Reputation

Do you want to add reputation for this user by this post?

or cancel

Ads by Google